About this item

• 3D Flameless: these flameless window candles have a 3D flame, the warm white LED light is pretty and bright enough.they have a natural flickering light.look and behave like real candles, really add to the ambiance of the holiday
• Package includes: 6 x Candles, 12 x AA Batteries, 6 x Silver Candle Holders, 6 x Suction Cups, 1 x Remote Control with Timer, The included battery is high capacity and can run than 400 hours continuously
• Size: Totle (9″ Height), candle (0.9″ Dia x 8″ Height), Candle holder ( 2.4″ Dia x 1.4″ Height); Material: ABS
• Remote/Timer: The distance can be to 5 meters with the infrared remote control. 2/4/6/8 hours timers, 24 hours cycle; the flashing pattern and light brightness can be adjusted. Suitable for Hotels, bars, home, churches, temples, parties, beach, etc
• Safe and clean: The battery operated taper candles take 2 AA batteries each (batteries included). No fire, no smoke, no messy dripping wax. Much safer and cleaner than real candles

› See product details

The suction cups soak in boiling water for a few minutes and clean the suction cup for better results. You need to clean the glass or other smooth surface with water or rubbing alcohol before applying. How to open the Candle?

Take the battery insulating tab from the remote

“Turn clockwise switch on the bottom to ON. The candle will open until you manually turn counter clockwise the switch to .

ON- button:
Open the Candle On=(Note:Before you use the Remote Control, switch the ON- button to ON at the buttom of the LED candles)
MODE: There are two modes for the candle light. between flicker mode and steady light.candle mode for flicker, light mode for not flicker .the remote at the candles and pressing the “Candle” button.Press “Candle” to flickering light and press” Light” to steady light.
Dimmer:
2 adjustment: Use these two dimmer buttons to change the brightness of the candle.Each dimmer.button could be change light brightness by twice.Left button to lower the brightness Right button to increase brightness.If the flame doesn’t flickering after you press “light” button, press + to increase .brightness to maximum

Specification
1. Materials: ABS
2. Measurements: Each candle measures approx. 0.9″ diameter, H8″
3. Flash mode: Warm white flicker
4. LED color: Warm white
5. Remote: 10 keys
6. Remote battery: 1-CR2025 (included)

Remote control instructions
1. ON/: to control the candle light on or
2. Timer: 2/4/6/8 hours; When it switches to 2H, the tealight lights up for 2 hours on and then automatically turns for 22 hours. 24-hour cycle, same use on other timers (4/6/8 hours).
3. Mode: On the “candle” position, it will light but would flicker flame; On the “light” position, no-flicker, just like real flame.
4. Dim: This two switches could control the candle light brightness